How to Unclog a Drain with Standing Water Using 4 of the Cheapest Ways

A stocked up drain is such a disturbing situation in your home. Do you find yourself caught in the same position after you take your shower? Does the water reach your feet or higher when you take a bath? If you are dealing with so much standing water after your shower time or bath time, then you are most likely having a clogged drain.

So, it is crucial that you unclog your drain as early as possible because standing water may create huge problems in your bathroom or even your entire house. But, from now on you don’t need to worry because we have the solutions on how to unclog a drain with standing water!

The level of severity of the blockage may determine how long you may be dealing with standing water, maybe hours or days. Standing water can bring about these hazards:

If you decide to choose the route of finding solutions to this problem, here are some methods you can shower again accordingly. Before beginning these steps, you need to take essential measures to drain your standing water.

What You Have to Prepare Beforehand:

You may do this strategy by just looking and repairing the clogged drain with your fingers. But, you should put on your protective gloves before making contact with all the dirt that has gathered in your drain. You can see soap scum, unwanted hair, and other products that clog your drain. Most of the time, these things can be visible.

So, you can clean them out using your fingers. After doing so, you need to examine if the water can now drain in your bathroom. 

If you have cleared the visible blockage from the drain, but it is not yet draining, then try to use a plunger. Take note that you have to get rid of the standing water before you start with the process. Get a screwdriver and take way the overflow cover that you can locate underneath the faucet. Then, check the coil and remove some bathroom products and hairs that are clogging it.

After removing the overflowing cover, obtain a rag and place it in the hole of the opening. Ensure that you put it in there tight enough. That will make sure that the air won’t escape when you try to use the plunger. Also, you need to use your free hand to keep your rag in place for the opening. If you could ask someone to maintain the rag or cloth lodged, it will make the process easier and smoother.

After preparing everything, begin plunging your drain. Have the right amount of time to continue the whole process. If you are a first-time user, it is most likely that you will think that this method won’t work. But, with some time and effort, it will be paying off soon. When you hear the water draining, then the strategy is a success. 

If you are not familiar with using a plumbing snake, then this can be challenging. If you are not sure what to do, then that’s when you’ll need to have a professional to repair the problem. If you have tried the plunging strategy, then you should have taken the cover out by now. So, obtain the plumbing snake and put it into the opening. You have to insert the snake into the gap until you meet some resistance in the tube.

After hitting resistance, try to utilize the snake to unclog the drain. Once you met the resistance you need, twist the snake counter clockwise to turn it into the blockage. If the clog never breaks apart, then you need to try pulling the clog out from the overflow cover. In case this way doesn't work, then you may try drain cleaners.

We know that some people do not want to use chemicals into their drains to unblock it. That makes sense because a lot of drain cleaners may make the situation worse and clog the drain more. Also, it can cause rusts and may damage your pipes.

What You Need to Prepare:

For this strategy, you have to use baking soda and vinegar. You have to begin with a half cup of baking soda. Then, pour it down the drain. Allow the baking soda to settle completely. Next, get the vinegar and put a half cup of it down the blockage. Make sure that you do this gently. After a few moments, you will notice that bubbling will happen.

When you see this occurring, you need to cover the rain and wait for it to stop. Once the bubbling stops, do it all over again.

After doing these steps, let everything sit for at least 30 minutes. Then, set up the hot water. After the 30 minutes, put the water down the drain. 

These are the methods you need to do to unclog the annoying drain in your bathroom. That way, it will relieve the standing water gathered because of the blockage.

If one of these solutions helps you unclog your bathroom drain, then feel free to share us your journey. But, if none of them were useful to you and you are still having this issue, then maybe it’s time to call your local plumber!