How To Build A PVC Soccer Rebounder For Kids

You'll only spend around two hours to make a DIY soccer goal from PVC pipes. You can even bond with your kids.

The best part? You can accomplish this at about half the price of a soccer goal rebounder that you might buy!

What is PVC?

Polyvinyl chloride, also called PVC or vinyl, is a synthetic resin made from the polymerization of vinyl chloride. About 40 million tons of PVC are produced each year, making it the world's third-most widely produced synthetic plastic polymer.

Vinyl is used in a variety of applications, including domestic products, such as shower curtains, raincoats, and packaging. Various industries such as energy, electronics, health care, construction, plumbing, and sports also rely on Build A PVC Soccer Rebounder to create durable and moisture-resistant products.

Furthermore,Build A PVC Soccer Rebounder is resistant to abrasion. This is why vinyl is ideal for flooring, decking, fencing, roofing, cladding, and windows. It also does not need frequent cleaning and maintenance.

Tools and Supplies To Build A PVC Soccer Rebounder

A search in your garage or a quick trip to the hardware store will give you all the tools you'll need. With some pipes and netting, you can create a lightweight soccer goal and turn your backyard a safe place for your kids to play.

General Materials

For measuring, cutting, and assembling, you need the following materials:

• Tape measure
• Marker pen
• Handsaw
• PVC glue or cement
• Utility scissors or wire cutters
• 20 to 30 pieces of zip ties
• Sandbags
• Stakes (optional)

PVC or Pipes

Because of its versatile yet rigid construction, PVC can serve as a reliable frame or structure for DIY projects. For this project, you need to gather:

• Six (6) rounded or elbow PVC corners
• Four (4) T-style PVC corners
• One (1) 10-foot PVC pipe

Net

When it comes to netting, there are two options to choose from:

• Buy a commercial net from stores that come with bungee cords and Velcro straps.
• Use deer, fish, or poultry netting as an alternative.

Step-by-Step Guide on How to Build a PVC Soccer Rebounder

The following steps will guide you in making a 5 feet x 8 feet soccer goal. This size is not full length, yet it should be enough for your kids to enjoy. If you want a bigger goal post, consider using longer pipes.

Step One: Gather your materials

Make sure to gather all the necessary tools and materials before getting to work.

Step Two: Take measurements

Using a tape measure and marker pen, divide the 10-foot PVC into sections you'll need to form the frame of the goal. Mark each section for cutting. You will need:

• Four 1-foot pipes
• Four 3-foot pipes
• Two 4-foot pipes
• Two five-foot pipes

Step Three: Make the Cut

Lay the marked-up PVC on a worktable or the floor. Use a handsaw to cut the pipe at the marks. Begin with slow, small strokes on the cut marks then move to long, straight strokes to cut through the pipe.

Continue until you've cut all pieces. Smooth out the cut ends to remove sharp edges.

Step Four: Form the lower part of the frame

You'll need to check if the sections of the pipe fit together correctly. First, make two corners of the frame. Use a PVC elbow to connect a 1-foot section to a 3-foot section.

Attach t-style corners on the other ends of the 1-foot pipe. Afterward, connect a 3-foot section to the two tees.

Step Five: Assemble the top part of the frame

This part is almost similar to step number four. However, you'll need to use a PVC elbow to attach the 1-foot pipe to the 4-foot pipes.

Step Six: Dry-fit the frame

Attach another PVC elbow at the bottom of the 4-foot pipe (top part of the frame). Insert the other end to the upper part of the frame to the PVC elbow. You should now see an L-shaped structure. 

Lastly, use the 5-foot pipes as brace pieces. Connect the upper and lower PVC tees using the 5-foot sections.

Step Seven: Glue to assemble

To make sure the soccer rebounder stays together, you must apply PVC glue or cement at the joints.

Once you've dry-fit the goal, take it apart one piece at a time. Apply PVC glue or cement inside the connector and outside the pipe. Put the two back together and hold the fittings in place.

Continue to take apart each joint, put PVC glue, and fit the pieces back together. Hold the pieces in place for five to 10 seconds before letting go.

Step Eight: Attach the net

Unroll the net and measure out enough to cover the sides and back of the goal. Start around the bottom of the frame because that is the longest distance the net must cover.

Use utility scissors to cut the netting to your desired size. Add an allowance, so that the net can catch the ball without tearing.

Wrap the netting around the PVC goal. Use zip ties to secure the net in place. Snip off the long ends of ties and excess netting.

Step Nine: Hold down the goal

Since your soccer rebounder is lightweight and portable, strong wind or force can tip it over. Put some sandbags in the corners of the pipe goal to hold it down.

If you think you'll not be moving the soccer rebounder to a different location, you can consider anchoring the soccer goals in place. The easiest way is to drive two to four 10-inch stakes on the ground.

Conclusion

PVC soccer goals may serve your kids for quite some time. This is why you may also consider opting for full-sized soccer rebounders that have adjustable nets or sturdier frames.

If you like to keep it homemade, use the simple instructions and information we've shared to build your own sports equipment. Now, take the PVC soccer rebounder to the yard and let your kids practice their kicking and passing skills.

Watch This Video To Learn More About Building A Soccer Rebounder