How to Spot Them Early

Water heaters are everyday essentials. They provide hot water almost instantly, making your life easier. Hence, any small repair to your water heater can disrupt the flow of your entire day. So, you must stay aware of the working condition of your water heater, especially in the winter.

Better yet, professional plumbers in point cook recommend homeowners have regular plumbing inspections to identify problems even before they occur. This proactive approach cuts unnecessary expenditures.

Thus, in this article, we discuss water heaters and how you can tackle their several problems. Bookmark this article because we know you will need this sooner or later.

1. Leaking Unit

One of the most obvious signs that you need hot water repairs is if your water heater unit is leaking. You will notice water pooling around the unit. The cause of the problem could be a damaged pipe or loose joints.

When you notice this sign, you must immediately get it fixed, as it can damage other components when left unrepaired. Further, it may even cause mould around the walls. So, as soon as you identify the problem, call your plumber in Point cook and repair it.

Most likely, you need to replace the damaged part.

2. No Hot Water

Another obvious sign you need hot water repairs is if the unit is not heating the water— all you get is ice-cold water. The reason could be the pressure built up in the pipes and fixtures or insufficient electricity supply.

3. Popping and Hissing Noises

Hearing any noises from your water heater is another sign you need to consider. It is due to the air in the pipelines. In most cases, it is a simple issue, but it could sometimes escalate into a sudden burst of pressure. That is why it is better to fix it as soon as possible.

If you have a fair bit of experience with basic plumbing, you can simply unscrew an outside faucet to release the air stuck inside.

In other cases, it could also happen because of a broken heating element. This is a much serious problem where you need help from a professional. Your emergency plumber in Melbourne will come and flush the system properly or, if need be, advise you to get the unit replaced.

In fact, as a general plumbing practice, professionals recommend flushing your water heaters at least once a year. This removes sediment and allows the system to operate at full efficiency.

4. Stained Water

Sometimes, your water heater can also send signs with discolored water. When your water turns brownish due to the sediment formed inside the tank, you must realize that the metal parts are rusting. It happens due to condensation and poor circulation of hot water inside the tank. This must not be ignored for a long time.

5. Spotted Sink Drains and Bathtubs

90% of the time, people ignore the stains on sink drains and bathtubs. However, when you look deep, this could indicate a pipe leak near your water heater tank. It can be because of various reasons:

• Wear and tear
• Rust build-up in the joints
• Erosion of galvanised pipe materials
• Incorrect installation of fittings or valves
• Accumulation of sediment clogging drain lines

You need a professional plumber in point cook, to figure out the real reason. Because they have experience in each of these causes, they can figure out the actual cause in no time.

So, save yourself some trouble and seek a professional as soon as you can.

6. Age of the Unit

It may feel like you can get on with it for another couple of years, but you could be wrong. The average lifetime of most water heaters is ten years, more or less. After that, it is advisable to get the unit replaced. It’s a safe and efficient decision.

When this limit is crossed, your water heater breaks down more often than usual, or you may have other problems, such as inadequate heating.

Another common thought is that you are saving money by using the old product. In reality, it’s the opposite of it. Using an old water heater requires more energy, and thus, you will receive higher energy bills.

Go for an energy-efficient, latest water heater models to avoid such inconveniences.

7. Inadequate Water Temperature

If you are getting barely heated water, you can take it as a sign that your water heater is soon going to break down.

Sometimes, it can be a simple issue with the thermostat, which you can get fixed cheaply. However, if the problem is with the heating element, you have a bigger issue at hand. Call your plumber, and they will advise your due course of action.

Usually, your plumber will consider the age of your water heater. If it’s too old, it might be a better idea to replace the entire unit. As we said, you will enjoy significant savings from the latest energy-efficient water heater.

8. Low Water Pressure

If your home has lower water pressure than usual, it causes sediment to build up faster than usual, too. Here, hard and soft water also plays a part; since hard water usually clogs systems faster than soft water.

Considering all these, when your faucets have low water pressure, you can take it as a sign of sediment build-up. You may resolve the problem with simple service or get a new water heater.

However, do not push it to the last minute. Taking care of this issue early on can extend the life of your water heater and save much on energy bills.

Final Thoughts

The 21st century has brought us many comforts, and one of those many is water heaters. They make our lives better. Particularly people living in cold places know the value of a good water heater.

Thus, as a homeowner, you must look out for this everyday essential. Get servicing at regular intervals, use energy-efficient models, and whenever there is a problem, have it fixed without delay.

As simple as that!

Looking for a reliable plumbing company? — Try NLK Plumbing. Their expert water heater plumbers will ensure you get the best out of your appliance.

Not only do they offer hot water repairs, but they handle everything from gutter replacement in melbourne to pipe relining. Give them a chance, and you will not regret it.