7 Practical Tips To Keep Your Bathtub Safe And SlipFree 

Do you keep getting injured after slipping in your bathtub? If so, using a few simple tips can help you to reduce the slippery texture of your bathtub surface to make it safe for use.

A slippery bathtub is highly unsafe for the elders and kids of your family. They can hurt their bones, get scratches on their skin or even harm their back. So, preparing a bathtub that keeps them safe is the ideal comfort you can give them.

If you are looking for an easy-to-implement guide for keeping your bathtub safe and slip-free, then you are at the right place.

In this blog post, we will tell you practical tips for creating a safe bathtub experience where you won’t have to worry about your family’s well-being.

Let’s go.

1.    Use a Non-Slip Mat at the bottom of your Bathtub

You would have noticed that the bottom of the bathtub often becomes greasy with constant contact with water, soap, bath bombs, bathing oils, etc. So, when you try to get into the bathtub or get out of it, there are high chances for slips.

To prevent this, you can place a non-slip bath mat or adhesive straps at the bottom. They provide traction at the bottom of the bathtub preventing slips when you move in and out of the tub.

While purchasing a non-slip mat, make sure you buy a good quality product because a poor quality mat won’t be much effective.

2.    Frequently Clean and Dry your Bathtub

The soap residue from your last bath makes the bottom of your bathtub greasy and slippery. Plus, dirt or molds further add to it. It damages the surface of your bathtub and bathroom floor.

So, you can install non-slippery tiles on the floor and clean them at least once a week. Alongside, use a wiper to remove excess water after every bath.

Further, ensure proper air ventilation in the bathroom after use to make it dry and moisture-free.

3.    Use Non-slip sprays

Some bathtubs are made from a different material that can be inherently slippery in texture. So, despite cleaning and drying your bathtub, it won’t become slip-free.

In such cases, you can use a non-slip spray. You can find different kinds of acrylic non-slip sprays available in the market. They are made to reduce the slippery texture of your bathtub quickly.

To use it, properly clean and dry your bathtub. Next, follow the instructions given on its pack to spray it over the surface of your bathtub. However, you need to be careful about its application. Otherwise, spraying on non-slip surfaces can instead invite traction.

4.    Install Grab Bars or Rails

Shocking figures reveal that slips and falls cause over 80% of bathroom related injuries. Particularly when getting in or out of the bathtub or shower. In a wet bathtub, you must make irregular movements to prevent slips. For support, you may look to hold the sides of your bathtub or the nearby wall for stability.

But that can be equally risky and difficult. So, you must install a grab bar or rails to get support and balance for moving in your bathtub. In addition, it can help you avoid quick falls in the bathtub or bathroom.

When you install the grab bars, choose the right location where you otherwise hold on to something else. Moreover, test its stability before use. They should have a firm grip and be appropriately attached to the wall for proper safety.

5.    Adjust Water Temperature

When you suddenly step into extremely cold or hot water, it can send your body into an instant frenzy, making you fall.

To prevent this problem, carefully adjust the water temperature to a safe level. You can test the water temperature by dipping your finger in the bathtub before stepping inside.

It will reduce the chance of sensory disruption, ensuring your safety. Also, it’s essential to understand your body’s needs and preferences to choose the right water temperature for your skin and health.

6.    Maintain Good Lighting

Improper lighting is a common cause of falls and slips, and it can make you hit obstacles on your way in any room. Similarly, it can invite slips and injuries in the bathroom.

Consequently, it is necessary to ensure that your bathroom is adequately lit, creating sufficient visibility. This will help you identify potential obstacles and wet floors for safe navigation.

Moreover, it will give visual clarity during bathroom cleaning, helping you properly remove dirt and grease. Also, proper lighting is essential for the elderly with vision problems.

7.    Prevent Using Oils and Greasy Products

You may be using a lot of soaps, oils, and other kinds of products for skincare. Some specific products often leave the bathtub greasy and oily. They are a prime cause of slips and take a lot of effort to clean.

It makes a slippery film on the bathtub’s surface that is unsafe to stand or move. Alongside, it hampers the upper surface of the bathtub over time, removing that layer.

So, identify those products and use them outside the bathtub or replace them. If you use them in the bathroom, clean the floor dry to prevent any injury.

Summing Up

A bathtub is a comfortable place for your family to use regularly for a refreshing bath. Any kind of risk for slip can be harmful to your loved ones. To avoid it, you can follow some important practical tips and make it a safe corner for your family.

It is the perfect way to improve the bathing experience at your home without much effort to prevent undesirable incidents. Given this safety, you can extend your bathtub sessions and let your elderly or little ones enjoy it without worry.