Best Home tools reviews

Restoring Your Home After Water Damage In Daphne AL

abc news
waterproofing floor

waterproofing floor

They say that time and tides wait for none; water damage is something that can strike you at any time. Whether an independent house, an apartment or an office space, your property in Daphne AL can be restored and rejuvenated against the ugly effects of water damage.

Every water damage event is different, so each restoration process is also unique as per the specific circumstances. If you’re looking to restore your home after a water damage incident, the first thing to do is to carry out the clean-up process.

1. Identify Where the Water is coming from:

The manner of clean-up depends a lot on the source of water.

It’s generally identified to be one of these three categories, as per the IICRC:

  • Clean Water – water from a sanitary water source, such as a pipe leak, water overflowing from your overhead water tank, garden hoses, and even rainwater from roof gutters.
  • Grey Water – this is water with slight degree of biomedical/chemical contamination, such as toilet bowls with urine, laundry, dishwashers and so on.
  • Black or Toxic Water – This is water that is grossly contaminated, potentially containing pathogenic biomedical waste such as feces and blood; standing water with growth of algae, tiny insects and critters may pose to be potential heath risks.


2. How Much is the Water Damage?

Depending on the intensity of water intrusion, the IICRC classifies water damage into 4 classes:

  • CLASS 1 WATER DAMAGE: A minimal amount of water has reached materials and objects with predominately low porosity. Limited mitigation steps are needed, and requires very less time for drying.


  • CLASS 2 WATER DAMAGE: You have a significant amount of water discharged on materials with medium to high porosity, such as wood or gypsum drywall. As a lot of water is absorbed, the water damage is exacerbated with the volume of water, and thus, you need more drying time.


  • CLASS 3 WATER DAMAGE: A large amount of water is absorbed by highly porous materials like fabric, upholstery, carpets, soft wood and paperwork. Of course, you need the highest evaporation rate and immediate salvage and forced evaporation methods are needed.

  • CLASS 4 WATER DAMAGE: Here, because there are a lot of obstructions owing to the building assembly and materials, the water expulsion and damage restoration process is rendered difficult, time-consuming and expensive.


3. Cover Your Losses With Your Insurance Agency

Before you officially start restoring your property affected by water damage daphne, contact your insurance agency for assessing your property in detail to determine if it is a loss covered by the policy. However, please note that not all home insurance policies cover flood damage.


4. Prepping Your Home for Restoration

Remove debris and articles from the waterlogged areas and set them to dry. Water extraction must be done using a power vacuum. In case of grey or black water, call a water damage remediation company to take care of the job.

24-48 hours of water damage are most critical to avoid mold growing in your house. Remove any traces of water by air-drying your home, or using overhead fans, air movers or dehumidifiers in hard-to-reach corners.


5. Home Restoration Process

This involves tools and techniques for restoring your property to its pre-water damage condition. This may include minor repairs, such as replacing drywall and carpet area cleaning, or major repairs such as demolition and reconstruction of certain affected areas in your home.

Oftentimes, the restoration work is very extensive. Water damage professionals possess the tools and equipment, along with necessary accreditations, to do this job for you, leaving you nothing to worry about.

Water damaged ceilings are susceptible to breaking and crashing due to gravity; thus these are the most high risk areas, requiring immediate attention. Check for leak sources and repair them on priority.

Porous materials like upholstery, carpet, insulation, drywall, unsealed cement and wood form class 2, 3, 4 water damage categories, and are prone to degradation. These may need complete replacement if they have been left in the water for too long.



How Are We Doing?