Are you planning to replace your gas dryer? Or are you going to perform maintenance on your old one? Both of these tasks would require you to disconnect your dryer from its gas source. The sad thing is, this is a tricky and challenging activity.
Most people would choose to have it done by a professional, but if you insist on doing it yourself, you should understand the fact that you need to exercise extreme caution when doing this. With that in mind, we present to you the best way on how to safely disconnect a gas dryer.
What You Will Need:
Below are some of the items that you will need to perform this task:
- Wrench - You can use this tool to disconnect the dryer from the gas source.
- Screwdriver - This tool will help facilitate a faster unscrewing and tightening of the hoses.
- Duct Tapes - This is used to cover the gas supply line and prevent the gas from leaking.
- Goggles, Gloves, and Face Mask - These items will help protect you from possible leakage, fire, and explosion.
- Fire Extinguisher - As mentioned, this activity is a significant fire hazard. After all, you are dealing with a gas source. That is why it is best that you have a fire extinguisher on hand in case something happens.
Three Steps on How to Safely Disconnect a Gas Dryer
If you already have all these items on hand, then you can proceed on performing the following steps:
Step #1: Open your windows and doors.
Since there is a possible presence of fire hazard, gas leakage, an explosion, it is essential that you keep the area surrounding the dryer to be well-ventilated. Moreover, make sure that all the heat sources, pilot light, and flame sources are turned off.
Step #2: Shut down the dryer.
Remove any clothes inside the dryer. Afterward, turn it off then unplug it. You should also remove lint from the dryer’s lint screen. Once you are done with all of these, wait for 30 minutes to allow remaining gas to escape from the dryer.
After that, you can proceed with turning off the gas supply pipe. You can do this by closing the section valve near the dryer or turning the primary gas source of the entire house. Proceed with the next step only if you are no longer smelling any gas.
To learn how to do that, watch this video:
Pro Tip: It would be safe for you to look for gas leakage around your home. Once you find them, seal the leak using duct tape.
Step #2: Disconnect the gas dryer from the supply line.
Look for the hose that is connecting the dryer to the gas source. Take it off using an adjustable wrench.
Pro Tip: If the hose is secured with sliding bolts and screws, you can use your screwdriver to loosen them up.
But do not yank the hose right away. Before you do that, get your duct tape then slowly remove the tube. Once the hose is exposed, quickly cover its mouth with multiple layers of duct tape.
Once you have secured the opening of the hose, fold it back then tie it to the supply pipe.
Pro Tips: If your dryer has a vinyl hose, you should replace it with an aluminum hose right away. This is because vinyl is highly flammable. If you chose to replace the tube, you should remove it from the supply pipe. Apply duct tape to the mouth of the pipe right after yanking the hose off.
For a more detailed way on how to do this, watch this video:
Step #3: Clean up.
Even if you are thorough with your preparation, there’s still a chance that a certain amount of gas has escaped from the hose to your room. To stay safe, it is best that you keep the windows and doors open for few more hours. In this way, the gas can safely flow out of the room.
Throw the rubber materials and other items, but please keep the tightening rings and screws as you may need them when you reconnect the dryer at a later time.
Pro Tip: If you happen to see cracks or holes in either the hose or the pipe, you should replace them right away.
Disconnecting a gas dryer can put you, your family and your home at risk. That is why it is important that you exert extra effort in keeping everything secure and hazard-free. If you wish to prevent potential fire, explosion and gas leakage, you should follow these steps on how to safely disconnect a gas dryer.
Thomas is a Pro himself, who has been in the business of home renovation & construction, working with various tools. He used to be the owner of 2 local construction companies with over 18 years experience. His works also include writing inspiring Do IT Yourself Tips & Tricks.